You are here: Products 
Level measurement MBA propeller sensors Původní snímače MAIHAK Propeller sensor MBA 2.2 Ex
Level measurement MBA propeller sensors Původní snímače MAIHAK Propeller sensor MBA 2.2 Ex Propeller sensor MBA 2.2 Ex
| 
Originally manufactured level sensor from MAIHAK, later MAIHAK-SICK for horizontal installation. The sensor has not been manufactured for many years, but there is a replacement in the new series. You can use the parameters below to correctly identify the replacement.
MBA 2.2 Ex and MBA 2.2 Ex/Z10 / CSA for CSA standard
| Technical data | |
|---|---|
Grain size: |
30 mm |
| Working position: |
perpendicular from above
|
| Immersion depth: | 200 mm up to 6000 mm in steps of 100 mm |
| Shaft: |
with protective tube against material loading damage; version MBA 2.2 Ex / Z10 with shaft guide
|
| Blade size: | 98mm x 40mm or 250mm x 100mm lightweight materials |
| Submerged material: | verze -N-: smooth steel verze -R3-: all submerged stainless steel parts |
|
Evaluation part material:
|
Al cast |
| Protection DIN 40050: |
Evaluation part IP 54, submerged part IP 65
|
| Flange: | Flange DN 125 PN6 |
| Power supply: | 230VAC, 115VAC, 24VAC, 42VAC, with tolerance 15%, 50/60 Hz, 12VDC, 24VDC, 60VDC,with tolerance 5%, |
|
Power consumption:
|
3 VA |
|
Transport and storage temperature:
|
- 20°C...+60°C |
|
Material temperature:
|
max.+80°C - (does not apply to special designs) |
|
Ambient temperature:
|
max.+60°C - (does not apply to special designs) |
| Overpressure in the tank: | max. 0,8 bar (0,08 MPa) - (does not apply to special designs) |
|
Products since 2000:
|
max. 0,8 bar (0,08 MPa) |
| Weight: |
approx. 23.5 kg + 2.5 kg / m protective tubes and shafts
|
|
Special design
| |
| Hypertension: | MBA 2.2 DT Ex - 3 bar (0,3 MPa), 150°C |
|
Special design
Ex | |
| Options: | |
| Unpainted: | B3 |
|
Tropical protection:
|
B4 |
| Run control: | E2 |
| Electric heating: | H |
| Orders: | |
| Design: (standard or special design) |
|
| Embodiment-N- or -R-: | |
| Flange or thread: | |
| Impeller length: | |
| Impeller size: | |
| Power supply: | |
| Options: | |