You are here: Products 
Level measurement Vrtulkové snímače Původní snímače MAIHAK Propeller sensor MBA 2 Fl
Level measurement Vrtulkové snímače Původní snímače MAIHAK Propeller sensor MBA 2 FlPropeller sensor MBA 2 Fl
| 
Originally manufactured level sensor from MAIHAK, later MAIHAK-SICK for horizontal installation. The sensor has not been manufactured for many years, but there is a replacement in the new series. You can use the parameters below to correctly identify the replacement.
MBA 2 Fl/ CSA for CSA snadard
| Technical data | |
|---|---|
Grain size: |
30 mm |
| Working position: |
perpendicular from above
|
|
Immersion depth:
|
max. 15 m |
| Shaft: |
flexible steel rope 8 mm, stainless steel
|
| Blade size: | 98mm x 40mm or 250mm x 100mm for lightweight materials |
|
Submerged material:
|
MBA 2 Fl -N-: smooth steel MBA 2 Fl -R3-: all submerged stainless steel parts
|
|
Evaluation part material:
|
Al cast |
| Protection DIN 40050: |
Evaluation part IP 54, submerged part IP 65
|
| Flange: | Flange DN 125 PN6 |
| Power supply: | 230VAC, 115VAC, 24VAC, 42VAC, with tolerance15%, 50/60 Hz, 12VDC, 24VDC, 60VDC, with tolerance 5% |
|
Power consumption:
|
3 VA |
|
Transport and storage temperature:
|
- 20°C...+60°C |
|
Material temperature:
|
max.+80°C - (does not apply to special designs) |
|
Ambient temperature:
|
max.+60°C - (does not apply to special designs) |
| Overpressure in the tank: | max. 0,8 bar (0,08 MPa) - (does not apply to special designs) |
|
Products since 2000:
|
-0,5 bar ...+3 bar (does not apply to version Z10) |
| Weight: | ca. 8,5 kg + 1 kg/m steel rope |
|
Special design
| |
| Hypertension: | MBA 2 Fl D10 - 10bar (1,0 MPa) |
| High temperature: | MBA 2 Fl T250 /D10 - 250°C, 10bar (1,0 MPa) |
|
Special sealing:
|
MBA 2 Fl DT - protection against abrasive material, steam, etc.
MBA 2 Fl DTR - protection against abrasive gases, eg in the presence of sulfur
|
|
Special CSA design:
| |
| Options: | |
|
Indicator light on the evaluation part:
|
A1 |
| Unpainted: | B3 |
|
Tropical protection:
|
B4 |
|
Folding propeller:
|
DF1 |
|
Time delay:
|
E1 |
| Run control: | E2 |
| Freewheel: | F |
| Electric heating: | H |
|
Coating (Viton):
|
K1 |
|
Teflon-coated propeller and axle:
|
K2 |
| Orders: | |
| Design: (standard or special design) |
|
| Embodiment-N- or -R-: | |
| Flange or thread: | |
| Impeller length: | |
| Impeller size: | |
| Power supply: | |
| Options: | |
