| Detectors of collapses in the overfill |
RHP-5-S11200
|
NEW
Flap-type overfill board detector is suitable for fixed conveyors or overfills. It is produced in three basic designs according to supply voltage.
|
|
|
|
|
RHP-5-S12200
|
NEW
Rod overfill detector is suitable for fixed conveyors or overfills. It can be used even for open overfills, e.g. filling into a container.
|
|
|
|
|
RHP-5-S13200
|
NEW
Conic overfill detector is suitable for fixed conveyors or overfills. It is used for open overfills, e.g. filling of very fine material into a container (dust fraction).
|
|
|
|
|
BOS-4T
|
Rod conductivity overfill detector is suitable for fixed and movable conveyors or overfills. The probe works only with BOS-21. The conveyed material: e.g. coal, coke etc.
|
|
|
|
|
BOS-4L
|
Rope conductivity overfill detector is suitable for fixed conveyors or overfills. The probe works only with BOS-21. The conveyed material, e.g. coal, coke, etc.
|
|
|
|
|
BOS-21
|
Two-channel assessment unit for the conductivity probes BOS-4T and BOS-4L
|
|
|
|
|
UMV-1
|
Complete ultrasonic overfill detector. It is suitable for all types of conveyors, various conveyed materials and various fractions.
|
|
|
|
| Rotation Detectors |
|
SHR-2
|
NEW
Rotation detector in a robust design responding to the magnets MHR-2, MHR-3, MHR-4, MHR-5. It does not contain any electronics or movable mechanical parts. It is resistant to atmospheric effects. It does not require feeding.
|
|
|
|
|
VHR-Z
|
Amplifier modifying pulses from the SHR-2 detector for connection to the assessment unit VHR-10M or to the PLC automat.
|
|
|
|
|
SHR-3
|
NEW
Rotation detector in a robust design responding to the magnets MHR-2, MHR-3, MHR-4 and MHR-5. It contains an amplifier of pulses for connection to the assessment unit VHR-10 or to the PLC automat. It requires feeding.
|
|
|
|
|
MHR-2, MHR-3, MHR-4, MHR-5
|
NEW
Magnets for the rotation detectors SHR-2 and SHR-3.
|
|
|
|
|
VHR-10M
|
Two-channel assessment unit of the creep of belt conveyors and other rotating machines. It assesses pulses from detectors. It allows information data transfer, see automation.
|
|
|
|
|
K1-VHR-10M-D
|
Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of two detectors SHR-2. It is necessary to select the type VHR-10M for the box.
|
|
|
|
|
K1-VHR-10M-S
|
Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of one detector SHR-2. It is necessary to select the type VHR-10M for the box.
|
|
|
|
|
K1-VHR-10M-I
|
Box with the equipment for the assessing unit of the creep of VHR-10M. It is intended for connection of two detectors SHR-3 or other detectors except for SHR-2.. It is necessary to select the type VHR-10M for the box.
|
|
|
|
| Belt Alignment Switches |
|
LHPE-10/2-L50V
|
Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches in a two-stage mode at the angles of 15° and 25°. The box – glass-fabric laminate. Contact 2 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHME-10/2-L50V
|
Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches in a two-stage mode at the angles of 15° and 25°. The box – grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHPE-10/1-L50
|
Electromechanical belt alignment switch in a robust design with an adjustable lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHME-10/1-L50
|
Electromechanical switch in a robust design with an adjustable lever. It switches at the angle of 25°. The box – grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHPE-10/2-LV
|
Electromechanical belt alignment switch in a robust design with a fixed lever. It switches in a two-stage mode at the angles of 15° and 25°. The grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHME-10/2-LV
|
Electromechanical belt alignment switch in a robust design with a fixed lever. It switches in a two-stage mode at the angles of 15° and 25°. The box - grey cast iron. Contact 2 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHPE-10/1-L
|
Electromechanical belt alignment switch in a robust design with fixed lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHME-10/1-L
|
Electromechanical belt alignment switch in a robust design with fixed lever. It switches at the angle of 25°. The box – grey cast iron. Contact 1 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
VSP-3B
|
Multidirectional electromechanical belt alignment switch in a robust design with a spring lever. It switches in all directions. The box – steel. Contact 1 – change-over contact.
|
|
|
|
|
ET-4T
|
Electromechanical belt alignment switch with an adjustable lever. It switches at the angle of 15°. The box – steel. Contact 1× change-over contact. Only for small conveyors in light industries.
|
|
|
|
|
|
Other switches are on the page Emergency Stop Safety Switches
|
|
|
|
| End Switches |
|
LHPE-10/1-R
|
Electromechanical end switch in a robust design with a fixed lever. It switches at the angle of 25°. The box – glass-fabric laminate. Contact 1 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
LHPE-10/2-R2
|
Electromechanical end switch in a robust design with a fixed lever. It switches with the distinction between the right and left sides. The box – glass-fabric laminate. Contact 2 × module 1 × break-type contact and 1 × closing contact.
|
|
|
|
|
|
Other end switches are on the page Emergency Stop End Safety Switches
|
|
|
|
| Material Detection |
|
UMV1
|
KComplete ultrasonic detector for material detection on the conveyor belt. It is suitable for all types of conveyors, various conveyed materials and various fractions.
|
|
|
|
|
UMV1 s PID
|
Complete ultrasonic detector for material detection on the conveyor belt with the PID regulation. It is suitable for all types of conveyors, various conveyed materials and various fractions.
|
|
|
|
| |
|
Metal Detectors – see the separate page |
| |
| |
|
Humidity Measuring – see the separate page |
| |
